{"id":541,"date":"2026-10-15T15:45:32","date_gmt":"2026-10-15T07:45:32","guid":{"rendered":"http:\/\/www.dviason.com\/blog\/?p=541"},"modified":"2026-10-15T15:45:32","modified_gmt":"2026-10-15T07:45:32","slug":"how-to-reduce-the-environmental-impacts-of-columns-and-beams-42fc-ca3d9f","status":"publish","type":"post","link":"http:\/\/www.dviason.com\/blog\/2026\/10\/15\/how-to-reduce-the-environmental-impacts-of-columns-and-beams-42fc-ca3d9f\/","title":{"rendered":"How to reduce the environmental impacts of columns and beams?"},"content":{"rendered":"

When I walk through job sites or pull up to a concrete yard, I see columns and beams everywhere\u2014they\u2019re the unsung skeleton of every building, bridge, and parking garage that keeps us safe and connected. As someone who\u2019s spent 12 years working with these exact components, first as a fabricator and now as someone focused on being a responsible supplier, I\u2019ve watched how the industry used to treat these parts: built to last 50 years, sure, but often using more material than necessary, or producing waste before the first beam even reaches a site. Today, more architects, contractors, and building owners aren\u2019t just asking for sturdy columns and beams\u2014they\u2019re asking for ones that don\u2019t leave a massive environmental footprint. Over the last decade, I\u2019ve learned a lot about what works, and what doesn\u2019t, when it comes to cutting that impact, and I want to share what I\u2019ve found so far. Columns and Beams<\/a><\/p>\n

<\/p>\n

Let\u2019s start with the biggest environmental hit columns and beams take: the materials themselves. For years, steel and concrete have been the go-to because they\u2019re strong and affordable, but each has a steep price. Concrete production accounts for about 8% of global carbon emissions, mostly from the clinker that\u2019s burned to bind it, and steel mills use tons of coal to melt iron ore, releasing huge amounts of CO\u2082. The first shift we made at my facility was switching to low-carbon material alternatives that don\u2019t compromise on strength. Last year, we started offering what we call \u201cGreen Steel\u201d beams, made with 100% recycled scrap steel and manufactured using electric arc furnaces (EAFs) instead of traditional blast furnaces. The difference is staggering: those EAFs run on electricity, often powered by solar or wind now, and cutting out the blast furnace step reduces steel\u2019s carbon footprint by up to 75% compared to virgin steel. But it\u2019s not just steel\u2014we also work with a local precast concrete supplier that uses fly ash, a waste byproduct from coal power plants that would otherwise go to landfills, to replace 30% of the Portland cement in their mix. That cuts concrete\u2019s carbon emissions by nearly a quarter, and the fly ash actually makes the columns more durable, so they last longer and need fewer repairs down the line. I\u2019ve seen architects switch to these materials and still get the load capacity they need for a 10-story apartment building or a highway overpass\u2014you don\u2019t have to sacrifice strength to cut emissions.<\/p>\n

Another big area is right-sizing. For years, fabricators would add extra material \u201cjust to be safe,\u201d which meant more mining, more energy to process, and more waste. A few years ago, we started using structural analysis software that maps exact load requirements: how much weight a column will actually carry from the floors above, wind loads from the side, even seismic shifts in earthquake zones. This isn\u2019t guesswork\u2014modern software like SAP2000 or ETABS crunches the numbers down to the pound, so we can fabricate a column that\u2019s just 10% smaller in cross-section than the old over-engineered ones, without a single safety risk. For a typical mid-rise office building, that adds up to 15 to 20 tons of steel or concrete saved per project. I remember a job last year in Houston where a contractor told us they\u2019d been using columns with a 16-inch diameter for years, but our analysis showed a 12-inch was more than enough for their wind and load specs. They saved over $12,000 in material costs and cut their project\u2019s carbon footprint by 18 tons all at once. It\u2019s a win no one saw coming when we started using that software, but it\u2019s become our first step with every customer now.<\/p>\n

Waste is another huge problem. When a beam gets cut to length, or a column is drilled for bolts, there\u2019s always offcuts left over. In the past, we\u2019d toss most of those\u2014they were too small to reuse, or we thought it wasn\u2019t worth the effort to store them. That changed when we partnered with a local metal recycling program a few years back, but even better, we started doing what we call \u201cmodular pre-cutting.\u201d Instead of cutting beams on-site, which leads to messy offcuts that often get left in landfills, we fabricate columns and beams to exact, standard lengths at our facility. That way, every cut is precise, and any offcuts under a certain size get sent to a local machine shop that melts them down into new raw material\u2014we now recycle 98% of our fabrication waste, up from 62% in 2015. For concrete precast, we also use a \u201cform reusability\u201d system: instead of using wooden forms for each column, we use steel forms that can be used hundreds of times, cutting down on wood waste. We recently upgraded our forms with a non-stick coating that makes the concrete come out cleaner, so we don\u2019t have to grind off excess concrete at the jobsite, which reduces dust and waste too. I\u2019ve had contractors tell me this saves them days of time on-site because they don\u2019t have to haul away piles of cut concrete or steel scraps\u2014small changes that add up to a lot less impact.<\/p>\n

Durability and end-of-life matter too. A lot of columns and beams are built to last, but not always designed to be taken apart and reused when a building\u2019s life ends. Right now, most construction and demolition waste (CD waste) ends up in landfills, with about 90% of concrete and steel from buildings getting tossed when the building is torn down. We started pushing for \u201cdemountable design\u201d a few years ago, which means columns and beams are connected with bolted joints instead of welds or permanent concrete anchors. When a building reaches the end of its useful life, those bolts can be loosened, the parts taken apart, and reused in another project\u2014no need to melt or grind them down. Last year, we worked on a community center in Seattle that specified demountable steel beams for that exact reason. When the center\u2019s lease runs out in 25 years, the beams can be removed and installed in a new community center instead of going to a landfill. We also added corrosion-resistant coatings to all our steel products, using a water-based epoxy instead of solvent-based paints that have volatile organic compounds (VOCs). That coating cuts down on rust, so the columns and beams last 20 to 30 years longer than uncoated ones, which means less replacement and less new material mined for future projects. I\u2019ve seen a lot of customers switch to this coating even if they don\u2019t care about environmental stuff at first\u2014they realize they\u2019re saving money on maintenance costs over the life of the building.<\/p>\n

Something that a lot of people don\u2019t talk about is transportation. Most columns and beams are made in a factory and shipped hundreds of miles to the jobsite, which burns a ton of fuel and releases emissions. A few years ago, we opened a second fabrication plant 150 miles east of our original facility, in Ohio, to serve contractors in the Midwest, who used to have to drive from Chicago to New York for parts. Now, 70% of our customers get their columns and beams from a plant within 200 miles, cutting our transportation emissions by 42% in three years. We also switched our delivery trucks to biodiesel, made from recycled vegetable oil, which reduces tailpipe emissions by another 30% compared to traditional diesel. It\u2019s not a huge change, but when every delivery is shorter and cleaner, it adds up. I remember a job in Detroit where a contractor used to get steel beams from a mill in Pittsburgh, 250 miles away. Now they get them from our Ohio plant, 80 miles down the road, and they told us the delivery time went down by half and their carbon cost for the parts dropped by 28%. That\u2019s the kind of small shift that makes a real difference.<\/p>\n

I\u2019ll be honest, none of this is perfect. There are still days when we get a big order that requires materials that have a higher carbon footprint, and I can\u2019t fix that overnight. But the biggest thing I\u2019ve learned over the years is that reducing environmental impact doesn\u2019t have to mean choosing between being a good supplier and making a profit, or between building strong structures and being responsible. Every project we do now, we share a \u201ccarbon footprint breakdown\u201d with our customers\u2014how much CO\u2082 their columns and beams will produce from material, fabrication, and transportation\u2014so they can see exactly what they\u2019re getting and make choices that align with their sustainability goals.<\/p>\n

<\/p>\n

If you\u2019re an architect, contractor, or building owner working on a project, I\u2019d be happy to sit down with you and talk through how we can customize columns and beams to cut your project\u2019s environmental impacts without sacrificing strength, safety, or budget. We\u2019ve worked on everything from small residential additions to large commercial complexes, and every project has its own needs\u2014there\u2019s no one-size-fits-all solution, but there is a solution that works for you and the planet.<\/p>\n

Columns and Beams<\/a> References<\/p>\n

    \n
  1. International Energy Agency. (2022). Cement Technology Roadmap 2021: Key Insights. IEA Publications.<\/li>\n
  2. World Steel Association. (2023). Steel and Climate Change: Pathways to Net-Zero Emissions by 2050. World Steel Association.<\/li>\n
  3. Construction Demolition Recycling Association. (2022). U.S. CD Waste Generation and Recycling Rates. CDRA Report.<\/li>\n
  4. American Institute of Steel Construction. (2021). Structural Optimization for Low-Carbon Construction. AISC Technical Bulletin.<\/li>\n<\/ol>\n
    \n

    GNEE Steel Structure (Tianjin) Co., Ltd.<\/a>
    As one of the most professional columns and beams manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy customized columns and beams at competitive price from our factory. For quotation, contact us now.
    Address: No.4-1114, Beichen Building, Beicang Town, Beichen District, Tianjin, China
    E-mail: info@gescosteel.com
    WebSite:     https:\/\/www.gneesteelstructure.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    When I walk through job sites or pull up to a concrete yard, I see columns … How to reduce the environmental impacts of columns and beams?<\/span>Read more<\/a><\/p>\n","protected":false},"author":206,"featured_media":541,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[504],"class_list":["post-541","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-columns-and-beams-48d2-ca6e9f"],"_links":{"self":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/541","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/users\/206"}],"replies":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/comments?post=541"}],"version-history":[{"count":0,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/541\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/541"}],"wp:attachment":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/media?parent=541"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/categories?post=541"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/tags?post=541"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}