{"id":572,"date":"2026-10-22T00:50:52","date_gmt":"2026-10-21T16:50:52","guid":{"rendered":"http:\/\/www.dviason.com\/blog\/?p=572"},"modified":"2026-10-22T00:50:52","modified_gmt":"2026-10-21T16:50:52","slug":"what-are-the-international-standards-for-anodizing-services-40bb-c4eff8","status":"publish","type":"post","link":"http:\/\/www.dviason.com\/blog\/2026\/10\/22\/what-are-the-international-standards-for-anodizing-services-40bb-c4eff8\/","title":{"rendered":"What are the international standards for anodizing services?"},"content":{"rendered":"

Hey there, if you\u2019ve ever worked with metal parts\u2014whether for a bike frame, a kitchen appliance, or even a custom aerospace component\u2014you\u2019ve probably heard of anodizing. It\u2019s that process that turns plain aluminum into a hard, corrosion-resistant, sometimes colorful layer that makes parts last longer and look way better. But here\u2019s the thing: not all anodizing is created equal. As someone who runs an anodizing services shop, I can\u2019t tell you how many times I\u2019ve talked to a new client who got burned by a job that \u201clooked fine at first, but peeled 6 months later.\u201d That\u2019s almost always because they skipped international standards for anodizing services. Let\u2019s break down what those standards actually mean, why they matter, and how we (as a supplier) stick to them every single day. Anodizing Services<\/a><\/p>\n

<\/p>\n

First, let\u2019s get one thing straight: international anodizing standards aren\u2019t just random hoops to jump through. They\u2019re designed to make sure the layer you get is consistent, durable, and does what it\u2019s supposed to\u2014no surprises. The main bodies that set these rules are two big ones: the International Organization for Standardization (ISO) and the American Society for Testing and Materials (ASTM). Wait, but why do we care about international ones specifically? Because if you\u2019re shipping parts across borders, or using components in industries like aerospace or medical devices that need to meet global safety rules, local standards might not cut it. Let\u2019s start with ISO, since that\u2019s the most widely recognized across countries.<\/p>\n

ISO has a whole series of standards for anodizing aluminum, and the one most people reference is ISO 7599. If you haven\u2019t seen that number before, jot it down\u2014it\u2019s the backbone of quality anodizing. ISO 7599 covers the specifications for anodic oxidation coatings on aluminum and its alloys. Let\u2019s talk about the key parts of that, because this is where the rubber meets the road. For example, it defines the minimum thickness of the anodized layer based on what the part is used for. A kid\u2019s bike handlebar? That\u2019s probably a Class 2 coating, which is 10 microns thick. But if you\u2019re making a part for a marine application\u2014like a boat\u2019s propeller housing, which is constantly exposed to saltwater\u2014you need a thicker Class 3 coating, at 20 microns minimum. And for really heavy-duty stuff, like aerospace components, it goes up to 25 microns or more. I\u2019ve seen so many shops cut corners here\u2014they apply a 8-micron layer for a marine part, and then wonder why it rusts after a year. ISO 7599 eliminates that guesswork.<\/p>\n

But ISO doesn\u2019t stop at thickness. It also covers things like the coating\u2019s adhesion. How do you test that? One method is the crosshatch test\u2014you scratch a grid into the anodized layer, press a piece of tape on it, and pull it off. If the coating doesn\u2019t chip or peel, it passes. Another test is the abrasion resistance, which is important for parts that get scratched a lot, like tool handles. ISO 7599 sets rules for how much the coating can wear down under specific conditions. And if you\u2019re getting colored anodizing, it has to pass a colorfastness test too\u2014so it doesn\u2019t fade when exposed to sunlight or cleaning chemicals. That\u2019s a big one for consumer products; no one wants a white fridge that turns yellow after a few months.<\/p>\n

Now, the other big one is ASTM B580, which is specific to anodic coatings on aluminum for architectural applications. Wait, why is that separate? Because architectural parts (like window frames, curtain walls, and railings) have super specific needs\u2014they\u2019re outside all year, dealing with rain, UV rays, pollution. ASTM B580 breaks anodizing into types: Type I is decorative, Type II is general purpose, and Type III is hardcoat (that\u2019s the extra-thick one for high-wear areas). For example, a residential window frame would need Type II, Class 1 anodizing, which is 15 microns thick. A high-rise building in a city with lots of air pollution would probably need Type III, Class 2, at 25 microns. I worked on a job last year for a construction company doing a downtown office tower\u2014they sent us specs that strictly referenced ASTM B580, and we had to do salt spray tests to prove the coating could last 1,000 hours without corrosion. That\u2019s non-negotiable for them, because a faulty anodized facade would be a huge liability.<\/p>\n

Wait, but there\u2019s also a standard for hardcoat anodizing, right? That\u2019s the really tough, thick layer used for things like motorcycle engine parts, industrial machinery, and even firearms components. The key standard there is ASTM B587, which covers hard anodic coatings on aluminum. Hardcoat is different from regular anodizing\u2014it\u2019s applied at lower temperatures (like near freezing) to make the coating denser and harder. ASTM B587 sets the minimum thickness here too: for general hardcoat, it\u2019s 25 microns, but for extreme applications, it can go up to 100 microns. We had a client a while back making custom mountain bike crank arms\u2014they wanted hardcoat anodizing because it\u2019s scratch-resistant and looks killer. We followed ASTM B587 to the letter, did a hardness test (the coating has to be at least 350 Vickers), and they\u2019ve been coming back ever since because the parts hold up through years of trail abuse.<\/p>\n

Now, let\u2019s talk about why these standards matter for you, not just as a supplier. If you\u2019re a business owner sourcing anodized parts, not following these standards can cost you big time. Let\u2019s say you\u2019re a furniture maker using anodized aluminum for outdoor tables. You hire a cheap anodizer who uses a 8-micron layer instead of the required 15, and after a winter of snow and salt, the tables start getting white powdery corrosion on the surface. You have to replace all of them, which eats into your profit and makes you look bad to your customers. That\u2019s where knowing the right standards comes in\u2014you can specify ISO 7599 or ASTM B580 in your purchase order, so the supplier can\u2019t cut corners.<\/p>\n

But here\u2019s the thing: as an anodizing service provider, it\u2019s not just about meeting the standards\u2014it\u2019s about understanding how to apply them to different alloys. Aluminum isn\u2019t one-size-fits-all. 6061 aluminum, which is common for bike parts and automotive components, anodizes differently than 7075, which is stronger and used in aerospace. ISO and ASTM standards give general guidelines, but you have to adjust your process based on the alloy. For example, 7075 aluminum is more reactive, so you have to control the acid concentration in the anodizing tank more carefully to avoid over-etching the surface. I\u2019ve had to fix jobs where someone anodized 7075 with the same settings as 6061, and the parts came out pitted and weak. That\u2019s why at our shop, we test each alloy\u2019s response first, even if the client gives us standard specs. It\u2019s extra work, but it ensures we hit the standard and the part performs as expected.<\/p>\n

Another part of these standards is quality control. You can\u2019t just make anodized parts and hope they\u2019re good\u2014you have to test them. ISO 7599 requires that anodizers do regular tests: thickness measurements with a eddy current meter (no cutting the parts open, which is good for custom or high-value parts), adhesion tests, and corrosion resistance tests like salt spray. At our shop, we test every batch of parts\u2014we take a small test coupon from each rack that goes into the anodizing tank, and we run all the required tests on that coupon before we ship the order. That way, if something is off, we catch it before the parts leave our facility. Last quarter, we had a batch of 6061 aluminum brackets where the acid level in the tank was slightly off\u2014 the test coupon showed the thickness was 12 microns instead of the required 15. We pulled the whole batch, adjusted the tank, and re-anodized them. It delayed the order by a day, but it saved the client from getting faulty parts and us from a bad review. That\u2019s how you build trust, right?<\/p>\n

Wait, but what about niche industries? Like medical devices? Or aerospace? Those have their own additional requirements, but they still tie back to the international standards. For example, ISO 13485 is for medical devices, and it references ISO 7599 for anodizing. So if you\u2019re making a surgical tool with an aluminum component, you need anodizing that meets both ISO 13485 and ISO 7599. That means no harmful chemicals in the anodizing process, easy to sterilize, and the coating doesn\u2019t flake off and get into a patient\u2019s body. We did a job for a medical equipment manufacturer last year\u2014they had really strict specs, all tied to ISO 7599 and ISO 13485. We had to document every step of the process, from the alloy we used to the temperature of the tank, and keep records of all the tests we ran. It\u2019s more paperwork, but it\u2019s necessary for industries where safety is non-negotiable.<\/p>\n

A lot of people ask me: \u201cCan I just get anodizing without following these standards? It looks the same.\u201d Yeah, sometimes it looks the same at first. But give it time. The cheap anodizing you get from a guy in a garage with a small tank might look like the real thing, but after a few months, it fades, peels, or gets corroded. The standard anodizing that meets ISO or ASTM is built to last years, even decades. I\u2019ve seen parts we anodized 8 years ago that are still looking good on old factory machinery, while parts from a non-standard job I did for a buddy 5 years ago are already rusting through. The difference is the standards.<\/p>\n

Now, if you\u2019re a buyer, how do you make sure your anodizing supplier is actually following these standards? Don\u2019t just take their word for it. Ask them for test reports. A legitimate anodizing service will have records of the thickness tests, adhesion tests, and corrosion tests for every batch. Also, make sure the standards are explicitly in your contract or purchase order\u2014don\u2019t just say \u201canodize aluminum.\u201d Say \u201canodize per ISO 7599, Class 2, 15 microns thickness, pass 500-hour salt spray test.\u201d That leaves no room for confusion or cutting corners.<\/p>\n

As for us, we don\u2019t just follow these standards\u2014we live by them. Every technician on our floor is trained on ISO and ASTM requirements, and we update our process whenever there\u2019s a new revision of the standards (they get updated every few years as technology improves). We also work with clients to help them figure out which standard is right for their specific part. If you\u2019re not sure if you need ISO 7599 or ASTM B580, we\u2019ll walk you through it\u2014no pushy sales stuff, just honest advice.<\/p>\n

At the end of the day, anodizing is a value add for your parts, not a afterthought. Whether you\u2019re making a consumer product that needs to look good for years, an industrial part that has to hold up in harsh conditions, or a medical device that needs to be safe, following international anodizing standards is non-negotiable. Skipping them might save you a few bucks upfront, but it\u2019ll cost you in the long run\u2014replaced parts, lost customers, bad reputation.<\/p>\n

<\/p>\n

If you\u2019re working on a project that needs high-quality anodizing, and you want to make sure it meets all the right international standards, hit us up to chat. We\u2019ll send over our test reports, walk you through our process, and make sure your parts come out exactly how you need them. No surprises, no shortcuts\u2014just anodizing done right.<\/p>\n

CNC Cutting Services<\/a> References:<\/p>\n

    \n
  1. ISO 7599:2018, Anodizing of aluminium and its alloys \u2014 Specifications for anodic oxidation coatings<\/li>\n
  2. ASTM B580-21, Standard Specification for Anodic Oxidation Coatings on Aluminum and Aluminum Alloys for Architectural Applications<\/li>\n
  3. ASTM B587-21, Standard Specification for Hard Anodic Oxidation Coatings on Aluminum and Aluminum Alloys<\/li>\n
  4. ISO 13485:2016, Medical devices \u2014 Quality management systems \u2014 Requirements for regulatory purposes<\/li>\n<\/ol>\n
    \n

    Aqua Precision Machining Limited<\/a>
    As one of the most professional anodizing services suppliers and precision parts manufacturers in China, we’re featured by quality products and low price. With a professional production team, we are able to meet the needs of the majority of our customers. If you have any enquiry about quotation, please feel free to email us.
    Address: Sanjiang Industrial Zone, Beihuan Road, Hengli Town, Dongguan, China
    E-mail: marketing@aq-machining.com
    WebSite:     https:\/\/www.aq-machining.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, if you\u2019ve ever worked with metal parts\u2014whether for a bike frame, a kitchen appliance, … What are the international standards for anodizing services?<\/span>Read more<\/a><\/p>\n","protected":false},"author":202,"featured_media":572,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[535],"class_list":["post-572","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-anodizing-services-4bce-c51e75"],"_links":{"self":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/572","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/users\/202"}],"replies":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/comments?post=572"}],"version-history":[{"count":0,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/572\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/posts\/572"}],"wp:attachment":[{"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/media?parent=572"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/categories?post=572"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.dviason.com\/blog\/wp-json\/wp\/v2\/tags?post=572"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}